PRO4710A Compact HD Production Ready Optical Engine
May 7, 2024
PRO6500S Compact High Brightness Production Ready Optical Engine
May 7, 2024
System Highlights
- Modular all in one DLP®-based production ready
industrial projector - DLP6500 1080p (1920×1080) square pixel DMD
- All glass 0% offset optics, optimized for 381-
650nm transmission - Compatible with AVNET MicroZed System on
Module
- Compatible with Type A and S600 DMDs
- Various Luminus LED (CBT/CBM/PT) compatibility
- Less than 3 month turn around on modifications
- Up to 9,253 binary FPS and 247 8-bit fps
- Includes DLP® LightCrafter 6500 USB-based API
and host GUI
Continuing with the highly successful idea of modular
DLP® platforms that are found on the PRO4500,
Wintech has developed a higher resolution and higher
brightness Production Ready Optical Engine, called
the PRO6500. The PRO6500 utilizes Texas
Instrument’s 0.65” 1080p DMD (including both the
Type A and S600 versions). This DMD is ideal for 3D
Printing and 3D Measurement/Machine Vision
applications requiring maximum optical intensity and
DLP® array resolution.
The PRO6500’s modular architecture allows for quick,
low cost modifications to the base PRO6500 engine that minimize both expense and time to get to series production. The PRO6500 will accept various Luminus Devices
LEDs including the CBT-90 and PT-54 LEDs. An all glass optical architecture (including the prism and flys eye lens)
was chosen and optical coatings are optimized for 381-650nm. Optics configurations are similar to the PRO4500
and are 0% offset. The available lenses for the PRO6500 include both a 3D Printing and 3D Measurement optimized
option. Custom lenses, if needed, can be fabricated in about 3 months. Thermal management is provided by copper
heat piping and fan; however liquid cooling adaptations are available. The system size is 312x185x145mm including
the projection lens and weighs 3.6kg.
The PRO6500 multi-PCB stack was also designed for modularity and is functionally equivalent to the LightCrafter 6500
control electronics. All system critical components are located on the DMD driver PCB, allowing for low cost
electronics modifications to the LED driver PCB. The PRO6500 can operate in both RGB and monochrome modes
using an LED driver with up to three channels available. The multi-PCB stack provides a HDMI connection for data
transfer, a USB connection for system control, and an I2C interface for LED control. Two configurable I/O triggers are
available for camera and sensor synchronization. The PRO6500 is also designed to work with the AVNET MicroZed
System on Module which provides 10/100/1000 Ethernet, 1GB of DDR3 SDRAM, and a Micro SD card interface.
Wintech offers a complete software package to utilize these features.
Since the PRO6500 is based on the LightCrafter 6500’s DLPC900 chipset, performance and control are identical. The
PRO6500 utilizes the user friendly DLP® LightCrafter 6500 USB-based API and host GUI. The PRO6500 will support up
to 9,523 Hz binary patterns and up to 247 Hz 8-bit grayscale rate.
| PRO6500 LED Dominant Wavelength (nm) | ||||||
|---|---|---|---|---|---|---|
| 385 | 405 | 460 | 525 | 613 | RGB | |
| Application(s) | 3D Printing | 3D Printing | 3D Printing/3D Measurement | 3D Measurement | 3D Measurement | 3D Measurement/ Display |
| Minimum System Output Power | 1100mW | 2800mW | 2000mW | 600lm | 240lm | 380lm |
| Available Lens Working Distances (mm) | 150 | 150 | 150 900 | 900 | 900 | 900 |
| Corresponding Field of View (mm) | 96x54 | 96x54 | 96x54 562x316 | 562x316 | 562x316 | 562x316 |
| Projected Pixel Size (um) | 50 | 50 | 50 293 | 293 | 293 | 293 |
| Distortion (%) | <0.1 | < 0.1 | 0.1-1 | <0.6-1 | <0.6-1 | <0.6-1 |
Wintech Digital Systems Technology Corporation is a Texas Instrument’s DLP® Authorized Design House with
locations in both China and the US. We are a full service engineering company that can design and manufacture all
aspects of DLP® systems including electronics, optics, thermal management, light sources, firmware, and software.